Utilisateur

2017 Highlander Push to start EVO All standalone with Tharness & Evo start2 It Locks/Unlocks but DIDNT remotely start from Mobile. I had evoall standalone with Tharness installed on the 2017 Toyota Highlander push to start working perfectly fine Purchased a evo start2 with flash Link Updator 4 Removed the evo all module and update the firmare to latest Save receommended options and save the options Checked the Option C1,D1 H & H2 are on on the module Try to decrypt thru decryptor, didnt succed Installed EVostart 2 Antenna in the car windshield NOTE: the antenna cable shown in installation guide is bit different from shown, have more connector and loose 4 cables red black yellow and green Using Connection1 from evostart2 guide for EVO ALl standalone Installation StepA:Connect 6 pin Antenna conector to Antenna Step B: Connect 4 pin female blue connector to 4 pin male black connector from T harness STep C: Connect Yellow wire from Antenna cable to Yellow wire going on A1 on 20pin white connector of T harness Program EVO All with EVO start2 and got a green light. (programming successful) Installed app on mobile and try to start, When trying to start from MObile, the evostart2 gets a signal, shows blue light in atenna , but do nothing I tried with OEM key fob for lock x3, it does nothing Factory Reset the module, flash the module using flash Link Updator 4 Turn on c1 d1 and d6 h2 Program the module again and works with oem remote Program the evo start2 Able to lock and Unlock, but not able to start from mobile Troubleshooting: I removed the yellow wire sttached to tharness DONT KNOW WHAT HAPPENS WRONG ALso checked grounding dark blue wire from 20 pin T harness to check if get red, NO D1 is enabled please help

Now that I have my EVO ALL with THARNESS working on to the next step adding a EVO_START2 with a RFA2A adapter. The install diagrams are really not good, the antenna cable has 2 ends and a ING+ yellow wire. The RFA2A has 3 connectors and red black for power that is not needed???So which connector goes to what? The diagram really suck SORRY FORTIN. I think you have female and male connector mislabled a male has pins exposed and female no pins just sockets. Does anyone have pictures on the few connections I have to make

I had subscription of toyota 07 camry, which came with my bypasss module i used it a month back, was waiting for relays to come home\ today i am installing and its missing in my login what is the problem\\ or tell me thats wire please\\ my login is gpslitt@gmil.com

m installing viper 4806v myself...trying to locte wires for 6pin harness h/4 says Light Flas Isolation Wire- Pin 87a light flash relay pls help